Scholar's profile
Cheng, Chihchun
Professor
Scopus Data (view scopus profile)
Publication Achievements
1995 - 2026
Publication Index
Documents
82
CITATIONS
1260
H-INDEX
19
FWCI
0.66
Co-authors
82
Last Sync Date: 2026-06-17
Google Scolar
ORCID
Scopus
Print-friendly-
1Article
Wafer grinding parameter designs with pre-designated wafer profiles
International Journal of Advanced Manufacturing Technology 2026, 143 (5-6) , 3351-33670CitationFWCI -
2Article
Algebraic kinematic modeling and trajectory analysis for double-sided planetary grinding of silicon wafers in semiconductor manufacturing
Precision Engineering 2026, 97 , 660-6760CitationFWCI -
3Article
Ball Screw Preload Loss Detection with Features Extracted from Vibration Holospectra
Journal of Vibration Engineering and Technologies 2025, 13 (2)1Citation0.00FWCI -
4Conference Paper
MACHINE TOOL FOOTING ABNORMALITIES DETECTION BASED ON VIBRATION TRANSMISSIBILITY AND BAND MODAL ASSURANCE CRITERIA
Proceedings of the International Congress on Sound and Vibration 20250CitationFWCI -
5Article
3D grinding mark simulation and its applications for silicon wafer grinding
International Journal of Advanced Manufacturing Technology 2024, 130 (9-10) , 4415-44304Citation0.00FWCI -
6Conference Paper
Grinding Parameter Designs For Wafer Grinding With Predesignated Wafer Profiles
Proceedings of the World Congress on Mechanical Chemical and Material Engineering 20241CitationFWCI -
7Conference Paper
High-Static-Low-Dynamic Vibration Isolator Component Designed By Topology Optimization with Hyperplastic Material
Proceedings of the World Congress on New Technologies 20240CitationFWCI -
8Article
Suppressing blooming interference in structured light systems by adaptively reducing camera oversaturated energy
Optics Express 2023, 31 (26) , 43667-436851Citation0.00FWCI -
9Article
Short line segment interpolation by using velocity blending technology with high overlapping time
Journal of Manufacturing Processes 2023, 101 , 512-5266Citation0.22FWCI -
10Article
Smooth Interpolation Design with Consideration of Corner Tolerance Constraints for Robotics
Applied Sciences Switzerland 2023, 13 (15)5Citation0.00FWCI
Publication
Print-friendly-
41 Investigations of Correlation between Gear Transmission Error and Gear Vibration26th National Conference of the Chinese Society of Mechanical Engineers 2009 / 11Seminar Paper
-
42 Modifications of Structural Vrbro-Acoustic Characteristics Using Structural Patches, Dimples and Slots (I)2009 / 6Technical Report or Other
-
43 C. C. Cheng, C. P. Kuo, F. C. Wang and W. N. Cheng, “Moving Follower Rest Design Using Vibration Absorbers for Ball Screw Grinding,” Journal of Sound and Vibration, Journal of Sound and Vibration, Vol. 326, pp. 123–136. (SCI, EI)Journal of Sound and Vibration 2009 /Journal Article
-
44 C. C. Cheng, F. T. Wu and K. L. Ho, “Reduction of Flow-Induced Vibration and Noise of an Optical Disk Drive,” Journal of Sound and Vibration, Journal of Sound and Vibration, 320, pp. 43 - 59.(SCI, EI)Journal of Sound and Vibration 2009 /Journal Article
-
45 W. Y. Li, C. C. Cheng and Y. L. Lo, “Investigation of Strain Transmission of Surface-Bonded FBGs Used as Strain Sensors,” Sensors and Actuators A: Physical, Volume 149, Issue 2, 16 February 2009, pp. 201-207. (NSC 94-2218-E-194-006) (SCI)Sensors and Actuators A: Physical 2009 / 2Journal Article
-
46 Development of Vibration Diagnostic System for GearboxThe 32nd National Conference on Theoretical and Applied Mechanics 2008 / 11Seminar Paper
-
47 Developments Vibro-acoustic Response Suppression Techniques for Next Generation Optical Disk Drives (III)2008 / 6Technical Report or Other
-
48 防振器測試技術與設備之研發2008 / 5Technical Report or Other
-
49 防撞結構拓樸最佳化設計技術之研發The 32nd National Conference on Theoretical and Applied Mechanics 2008 / 11Seminar Paper
-
50 Vibration Analysis of Twin Screw CompressorThe 32nd National Conference on Theoretical and Applied Mechanics 2008 / 11Seminar Paper
Projects
Print-friendly| Teacher's name | Research Units | Year | Project title | Project position | Commissioning unit | Implementation period |
|---|---|---|---|---|---|---|
| Cheng, Chihchun | Department of Mechanical Engineering | 2025 | AI驅動半導體晶圓研磨技術之開發與關鍵元件之智慧製造(1/2) | Co-PI | 國家科學及技術委員會 | 2025/06/01-2026/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2024 | 基於拓樸最佳化方法之熱親合結構設計(2/2) | PI | 國家科學及技術委員會 | 2024/08/01-2025/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2024 | 113年度智慧製造跨域整合人才培育聯盟計畫 | SI | 教育部 | 2024/03/01-2025/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2024 | 應用5G工業物聯網推動CNC工具機產業數位轉型與雲端加值服務計畫(4/4) | PI | 經濟部 | 2024/11/01-2025/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2024 | (台大轉撥)結合邊緣運算與數位孿生之五軸工具機智能化技術研發(4/4) | PI | 國家科學及技術委員會 | 2024/06/01-2025/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2024 | (清華轉撥)聰明生產與智慧精準製造之數位決策、AI模型、大數據治理與核心技術之整合製造平台及其科技法律與產業生態系統(II)(2/2) | PI | 國科會 | 2024/11/01-2025/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2024 | 高效節能智慧工具機之系統開發-學門主題式計畫 : 高效節能智慧工具機之系統開發(1/3) | Co-PI | 國家科學及技術委員會 | 2024/08/01-2025/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2023 | (台大轉撥)結合邊緣運算與數位孿生之五軸工具機智能化技術研發(3/4) | PI | 國科會 | 2023/06/01-2024/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2023 | 應用5G工業物聯網推動CNC工具機產業數位轉型與雲端加值服務計畫(3/4) | PI | 經濟部 | 2023/11/01-2024/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2023 | (清華轉撥)聰明生產與智慧精準製造之數位決策、AI模型、大數據治理與核心技術之整合製造平台及其科技法律與產業生態系統(II)(1/2) | PI | 國家科學及技術委員會 | 2023/11/01-2024/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2023 | 工具機狀態評估與暖機分析系統研發 | Co-PI | 漢翔航空工業股份有限公司 | 2023/09/01-2024/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2023 | 基於拓樸最佳化方法之熱親合結構設計(1/2) | PI | 國家科學及技術委員會 | 2023/08/01-2025/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2022 | 應用5G工業物聯網推動CNC工具機產業數位轉型與雲端加值服務計畫(2/4) | PI | 經濟部 | 2022/11/01-2023/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2022 | (清華轉撥)聰明生產與智慧精準製造之數位決策、AI模型、大數據治理與核心技術之整合製造平台及其科技法律與產業生態系統(2/2) | PI | 國科會 | 2022/11/01-2023/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2022 | (台大轉撥)結合邊緣運算與數位孿生之五軸工具機智能化技術研發(2/4) | PI | 國科會 | 2022/06/01-2023/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2022 | 111年度智慧製造跨域整合人才培育計畫-製造運營管理技術、智慧製造感測聯網與數據處理分析技術、智慧製造資料庫與大數據分析課程教材發展計畫 | PI | 教育部 | 2022/07/01-2024/01/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2022 | (清大)產學合作計畫-運用演算法來進行矽晶圓機械加工之品質預測及加工參數優化(3/3)-晶圓切割與研磨優化技術之研發 | PI | 環球晶圓股份有限公司 | 2022/06/01-2023/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2022 | (清大)產學合作計畫-運用演算法來進行矽晶圓機械加工之品質預測及加工參數優化(3/3)-晶圓切割與研磨優化技術之研發 | PI | 國科會 | 2022/06/01-2023/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2022 | 應用拓樸最佳化設計類零剛性之隔振器（2/2） | PI | 國科會 | 2022/08/01-2023/09/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | 文湖線電聯車傳動軸振動頻譜分析工作 | PI | 台北大眾捷運股份有限公司 | 2021/08/15-2021/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | 感測器校正服務 | PI | 科研技術有限公司 | 2021/08/01-2021/10/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | 應用拓樸最佳化設計類零剛性之隔振器（1/2） | PI | 國科會 | 2021/08/01-2023/09/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | (清大)產學合作計畫-運用演算法來進行矽晶圓機械加工之品質預測及加工參數優化(2/3)-晶圓切割與研磨優化技術之研發 | PI | 環球晶圓股份有限公司 | 2021/06/01-2022/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | (清大)產學合作計畫-運用演算法來進行矽晶圓機械加工之品質預測及加工參數優化(2/3)-晶圓切割與研磨優化技術之研發 | PI | 國科會 | 2021/06/01-2022/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | 加工刀具振動訊號量測 | PI | 財團法人金屬工業研究發展中心 | 2021/08/01-2021/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | 加工刀具磨耗量估測 | PI | 財團法人金屬工業研究發展中心 | 2021/08/01-2021/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | 應用人工智慧於機聯網工具機之控制、預防維護與加工技術之研發(4/4) | PI | 國科會 | 2021/01/01-2022/01/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | 應用5G工業物聯網推動CNC工具機產業數位轉型與雲端加值服務計畫(1/4) | PI | 經濟部 | 2021/11/01-2022/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | (清華轉撥)聰明生產與智慧精準製造之數位決策、AI模型、大數據治理與核心技術之整合製造平台及其科技法律與產業生態系統(1/2) | PI | 國科會 | 2021/11/01-2022/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | 110大專生計畫-光學位移感測器之工程應用 | PI | 國科會 | 2021/07/01-2022/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | (台大轉撥)結合邊緣運算與數位孿生之五軸工具機智能化技術研發(1/4) | PI | 國科會 | 2021/06/01-2022/06/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2021 | 砂輪動平衡檢測服務 | PI | 聯合骨科器材股份有限公司 | 2021/04/14-2021/05/13 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 刀具磨耗AI預兆診斷建模技術 | PI | 台中精機廠股份有限公司 | 2020/06/01-2021/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 工具機旋轉軸幾何誤差量測與異常監控機制建立 | PI | 工業技術研究院 | 2020/06/09-2020/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 機械手臂量測系統設計與狀態評估 | PI | 友達光電股份有限公司 | 2020/06/01-2020/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 智慧製造感測聯網與數據處理分析技術、製造運營管理技術、智慧製造資料庫與大數據分析課程教材發展計畫 | PI | 教育部 | 2020/02/01-2021/01/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | (台大)虛實加工系統暨聯網智能化技術之研發(3/3) | PI | 國科會 | 2020/11/01-2021/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 感測器製作服務 | PI | 美商日紳先進科技股份有限公司 | 2020/03/16-2020/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | (清大)產學合作計畫-運用演算法來進行矽晶圓機械加工之品質預測及加工參數優化(1/3)-晶圓切割與研磨優化技術之研發 | PI | 環球晶圓股份有限公司 | 2020/06/01-2021/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | (清大)產學合作計畫-運用演算法來進行矽晶圓機械加工之品質預測及加工參數優化(1/3)-晶圓切割與研磨優化技術之研發 | PI | 國科會 | 2020/06/01-2021/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 應用人工智慧於機聯網工具機之控制、預防維護與加工技術之研發(3/4) | PI | 國科會 | 2020/01/01-2020/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 109大專生計畫-研發應用於動態量測之平面位移感測器 | PI | 國科會 | 2020/07/01-2021/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 刀具崩裂偵測技術開發 | Co-PI | 台朔重工股份有限公司 | 2020/10/01-2021/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 五軸龍門加工機的智慧化功能開發計畫 | PI | 大前科技股份有限公司 | 2020/07/01-2021/06/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2020 | 文湖線電聯車差速器振動分析 | PI | 台北大眾捷運股份有限公司 | 2020/09/01-2020/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | 工具機產學研智慧製造技術價值創造與落實應用計畫/共同開發(第4年) | PI | 經濟部 | 2019/06/01-2020/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | 108大專生計畫-平面位移感測器研發 | PI | 國科會 | 2019/07/01-2020/02/29 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | 3D列印多孔拓樸結構最佳化設計 | PI | 財團法人工業技術研究院 | 2019/10/18-2019/12/13 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | 高教深耕－前瞻製造系統頂尖研究中心【學術組】 | PI | 教育部 | 2019/01/01-2019/04/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | PHM搪床數據採集分析服務 | PI | 科智企業股份有限公司 | 2019/01/01-2019/04/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | 應用人工智慧於機聯網工具機之控制、預防維護與加工技術之研發(2/4) | PI | 國科會 | 2019/01/01-2019/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | 在地產業創新應用計畫-主軸健康監診與壽命預測系統 | PI | 財團法人工業技術研究院 | 2019/01/01-2019/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | 振動量測數據採集分析服務(友良高科技紡織) | PI | 友良高科技紡織股份有限公司 | 2019/05/01-2019/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | 振動量測數據採集分析服務(懋偉實業) | PI | 懋偉實業有限公司 | 2019/05/01-2019/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | (台大)虛實加工系統暨聯網智能化技術之研發(2/3) | PI | 國科會 | 2019/12/01-2020/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | SEA主軸迴轉精度量測服務 | PI | 東台精機股份有限公司 | 2019/05/01-2019/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | A+企業創新研發淬鍊計畫-滾珠螺桿不平行度線上診斷技術(1/3) | PI | 上銀科技股份有限公司 | 2019/07/01-2022/06/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2019 | A+企業創新研發淬鍊計畫-線性滑軌預壓力偵測演算法開發(1/3) | PI | 上銀科技股份有限公司 | 2019/07/01-2022/06/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 刀具崩裂估測技術開發 | PI | 光陽工業股份有限公司 | 2018/01/01-2019/03/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 高教深耕－前瞻製造系統頂尖研究中心【學術組】 | PI | 教育部 | 2018/01/01-2018/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 鍍膜設備狀態評估之數據蒐集 | PI | 財團法人工業技術研究院 | 2018/10/01-2019/01/20 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 燃料電池端板應力拓樸優化模擬研究 | PI | 財團法人工業技術研究院 | 2018/08/21-2018/11/20 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 價創計畫：智慧製造虛實系統整合技術-五軸數控重切削戟齒輪加工機開發II | Co-PI | 國科會 | 2018/05/01-2019/04/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 感測數據分析進階應用專案計畫 | PI | 科智企業股份有限公司 | 2018/08/16-2018/12/15 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | (國家實驗研究院)智慧製造技術聯網與分析應用-智慧製造技術聯網與分析應用(1/3) | PI | 國科會 | 2018/12/01-2019/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | (台大)虛實加工系統暨聯網智能化技術之研發(1/3) | PI | 國科會 | 2018/12/01-2020/01/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 應用人工智慧於機聯網工具機之控制、預防維護與加工技術之研發(1/4) | PI | 國科會 | 2018/01/01-2018/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 工具機產學研智慧製造技術價值創造與落實應用計畫/共同開發(第3年) | PI | 經濟部 | 2018/06/01-2019/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 智慧製造聯網技術、製造執行管理與大數據分析課程教材發展計畫 | PI | 教育部 | 2018/06/01-2020/01/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 主軸熱變位量測、補償暨迴轉精度進階分析技術開發 | PI | 永進機械工業股份有限公司 | 2018/09/01-2019/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2018 | 工具機數位設計製造與智慧控制技術聯盟(3/3) | Co-PI | 國科會 | 2018/03/01-2019/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 產學合作計畫（開發型）-進給系統運轉監控智能化技術之研發(3/3) | PI | 上銀科技股份有限公司 | 2017/06/01-2018/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 產學合作計畫（開發型）-進給系統運轉監控智能化技術之研發(3/3) | PI | 國科會 | 2017/06/01-2018/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 軸承測試平台設計 | PI | 工業技術研究院 | 2017/11/01-2018/04/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 工具機數位設計製造與智慧控制技術聯盟(2/3) | Co-PI | 國科會 | 2017/03/01-2018/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 產業領航計畫-單機智慧化相關技術研究 | Co-PI | 東台精機股份有限公司 | 2017/10/01-2020/03/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 環境大資料量測裝置之動態類比訊號轉換、擷取與傳輸服務 | PI | 財團法人國家實驗研究院國家高速網路與計算中心 | 2017/06/01-2017/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 建構智慧工具機聯網平台技術計畫 | PI | 財團法人國家實驗研究院 | 2017/04/01-2017/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 博士後研究程文男-進給系統運轉監控智能化技術之研發(3/3) | PI | 國科會 | 2017/08/01-2018/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 價創計畫：智慧製造虛實系統整合技術-五軸數控重切削戟齒輪加工機開發 | Co-PI | 國科會 | 2017/05/01-2018/04/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 積層製造過程中以拓樸最佳化設計外支撐結構技術之研發 | PI | 國科會 | 2017/08/01-2018/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 工具機產學研智慧製造技術價值創造與落實應用計畫/共同開發(第2年) | Co-PI | 經濟部 | 2017/06/01-2018/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 106-107年度智慧製造跨校跨域教學策略聯盟計畫 | Co-PI | 教育部 | 2017/09/15-2019/01/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 鹼性燃料電池端版輕量結構拓樸模擬技術開發 | PI | 財團法人工業技術研究院 | 2017/03/01-2017/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 嘉義縣市區域新創應用研究計畫-智慧機械 | PI | 財團法人工業技術研究院 | 2017/07/01-2018/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2017 | 建構智慧工具機聯網平台技術計畫(第二階段) | PI | 財團法人國家實驗研究院 | 2017/06/01-2018/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 博士後研究文志超-進給系統運轉監控智能化技術之研發(2/3) | PI | 國科會 | 2016/07/01-2017/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 工具機數位設計製造與智慧控制技術聯盟(1/3) | Co-PI | 國科會 | 2016/03/01-2017/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 主軸及減速機健康狀態診斷技術之研發 | PI | 東台精機股份有限公司 | 2016/07/01-2019/06/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | EPS轉向系統之振噪檢測軟體開發研究 | PI | 上銀科技股份有限公司 | 2016/04/01-2017/03/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 進給平台滑軌預壓自動偵測技術之研發 | PI | 國科會 | 2016/08/01-2017/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 工具機產學研智慧製造技術價值創造與落實應用計畫/共同開發 | Co-PI | 經濟部 | 2016/06/01-2017/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 產學計畫(開發型)-進給系統運轉監控智能化技術之研發(2/3) | PI | 國科會 | 2016/06/01-2017/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 產學計畫(開發型)-進給系統運轉監控智能化技術之研發(2/3) | PI | 上銀科技股份有限公司 | 2016/06/01-2017/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 主軸健康監診技術之全面考察勞務委託 | PI | 財團法人工業技術研究院 | 2016/11/01-2016/12/20 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 異音振動分析之案例研究 | PI | 光陽工業股份有限公司 | 2016/06/01-2016/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 博士後研究文志超-進給系統運轉監控智能化技術之研發(1/3) | PI | 國科會 | 2016/03/01-2016/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 主軸熱變位暨迴轉精度之進階分析技術開發 | PI | 程泰機械股份有限公司 | 2016/10/01-2017/09/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2016 | 主軸熱變位量測、補償暨迴轉精度進階分析技術開發 | PI | 協鴻工業股份有限公司 | 2016/09/01-2017/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 產學計畫(開發型)-進給系統運轉監控智能化技術之研發(1/3) | PI | 上銀科技股份有限公司 | 2015/06/01-2016/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 產學計畫(開發型)-進給系統運轉監控智能化技術之研發(1/3) | PI | 國科會 | 2015/06/01-2016/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 主軸油氣潤滑系統之程式控制 | PI | 協鴻工業股份有限公司 | 2015/07/01-2015/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 切削訊號量測模組開發 | PI | 百德機械股份有限公司 | 2015/03/01-2017/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 雷射加工機定位精度量測等4個服務項目 | PI | 惠特科技股份有限公司 | 2015/08/01-2015/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 切削訊號量測模組開發 | PI | 崴立機電股份有限公司 | 2015/03/01-2017/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 切削訊號量測模組開發 | PI | 友嘉實業股份有限公司 | 2015/03/01-2017/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 切削訊號量測模組開發 | PI | 永進機構工業股份有限公司 | 2015/03/01-2017/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 開發工具機智能化控制與切削加工模組(3/3) | Co-PI | 國科會 | 2015/11/01-2016/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 瓦楞結構最佳化設計技術之研發與其實驗驗證 | PI | 國科會 | 2015/08/01-2016/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 物聯網感測器專案-應用於智能化高速主軸之石英音叉式加速規之開發 | Co-PI | 財團法人國家實驗研究院 | 2015/10/01-2016/05/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 網際虛擬工具機加工精度分析、補償與監控技術之研發 | Co-PI | 國科會 | 2015/05/01-2016/03/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | 引擎檢測機台軟體設計(II) | PI | 光陽工業股份有限公司 | 2015/03/01-2016/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2015 | CNC進給系統模型建立與動態特性分析 | Co-PI | 財團法人精密機械研究發展中心 | 2015/03/01-2015/11/15 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2014 | 產學合作計畫-開發工具機智能化控制與切削加工模組(2/3) | Co-PI | 國科會 | 2014/11/01-2015/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2014 | 具多層瓦楞結構樑之振動分析與設計 | PI | 國科會 | 2014/08/01-2015/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2014 | 經濟部學界科專計畫-智能化進給系統之研發三年計畫(III) | PI | 經濟部 | 2014/01/01-2014/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2014 | 雷射積層製造結構拓樸最佳化勞務委託 | PI | 財團法人工業技術研究院 | 2014/09/01-2014/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2014 | 引擎檢測機台軟體設計 | PI | 光陽工業股份有限公司 | 2014/03/01-2015/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2013 | 102年度產業先進設備人才培育學程計畫 | 教育部 | 2013/01/01-2014/12/31 | |
| Cheng, Chihchun | Department of Mechanical Engineering | 2013 | 主軸熱變位暨迴轉精度複合量測與主軸動態分析 | PI | 協鴻工業股份有限公司 | 2013/03/01-2014/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2013 | 智慧致動器控制迴路增益值自動調整技術研究 | Co-PI | 財團法人精密機械研究發展中心 | 2013/03/01-2013/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2013 | 發展系統識別技術應用於顫振預測 | PI | 國科會 | 2013/08/01-2014/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2013 | 振動噪音基礎理論、分析與量測 | PI | 光陽工業股份有限公司 | 2013/03/01-2014/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2013 | 高科技設備前瞻技術發展計畫-利用雲端技術提升鋸床鋸帶製程技術計畫 | Co-PI | 高聖精密機電股份有限公司 | 2013/08/01-2015/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2013 | 智能化進給系統之研發計畫﹝III﹞ | PI | 國科會 | 2013/10/01-2014/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2013 | 開發工具機智能化控制與切削加工模組(1/3) | Co-PI | 國科會 | 2013/11/01-2014/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2012 | 智能化進給系統之研發計畫﹝I﹞ | PI | 國科會 | 2012/01/01-2012/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2012 | LED光電檢測設備動態與伺服系統分析 | Co-PI | 惠特科技股份有限公司 | 2012/06/01-2013/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2012 | 發展無限元素法於結構動力之應用 | PI | 國科會 | 2012/08/01-2013/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2012 | 經濟部學界科專計畫-智能化進給系統之研發三年計畫(II) | PI | 經濟部 | 2012/12/01-2014/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2011 | 經濟部學界科專計畫-智能化進給系統之研發三年計畫(I) | PI | 經濟部 | 2011/12/01-2014/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2011 | 工具機關鍵技術發展趨勢分析與未來策略 | Co-PI | 財團法人工業技術研究院 | 2011/03/03-2011/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2011 | 應用SIMP法於飛輪轉子拓樸設計之研究 | PI | 國科會 | 2011/08/01-2012/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2011 | 100年度產業人才扎根計畫 | PI | 財團法人工業技術研究院 | 2011/09/01-2012/06/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2010 | 產學合作計畫－電腦數控立式成形砂輪磨齒機關鍵技術研發-電腦數控立式成形砂輪磨齒機關鍵技術研發(2/2) | Co-PI | 陸聯精密股份有限公司 | 2010/12/01-2012/02/29 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2010 | 產學合作計畫－電腦數控立式成形砂輪磨齒機關鍵技術研發-電腦數控立式成形砂輪磨齒機關鍵技術研發(2/2) | Co-PI | 國科會 | 2010/12/01-2012/02/29 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2010 | 黏貼式布拉格光纖光柵其光譜特性與其應用之研究 | PI | 國科會 | 2010/08/01-2011/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2010 | 振動與熱變位複合量測軟體之開發 | PI | 榮田精機股份有限公司 | 2010/07/01-2011/05/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2010 | 產業人才扎根計畫 | PI | 財團法人工業技術研究院 | 2010/08/01-2011/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2010 | 產業人才扎根計畫(廠商配合款) | PI | 發得科技工業股份有限公司 | 2010/08/01-2011/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2010 | 香港商瑞師科技股份有公司台灣分公司申請投審案 | PI | 南部科學工業園區管理局 | 2010/01/06-2010/02/06 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2009 | 科學工業園區固本精進研究計畫－高速高精度加工技術暨智慧型偵測系統之研發 | PI | 南部科學工業園區管理局 | 2009/05/01-2010/04/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2009 | 應用結構貼片、凹痕與凹槽於結構振噪特性改良之研究(2/2) | PI | 國科會 | 2009/08/01-2010/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2009 | 產學合作計畫－電腦數控立式成形砂輪磨齒機關鍵技術研發-電腦數控立式成形砂輪磨齒機關鍵技術研發(1/2) | Co-PI | 國科會 | 2009/10/01-2010/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2009 | 產學合作計畫－電腦數控立式成形砂輪磨齒機關鍵技術研發-電腦數控立式成形砂輪磨齒機關鍵技術研發(1/2) | Co-PI | 陸聯精密股份有限公司 | 2009/10/01-2010/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2008 | 工具機主軸振動監測軟體開發 | PI | 工業技術研究院機械研究所 | 2008/05/01-2008/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2008 | 應用結構貼片、凹痕與凹槽於結構振噪特性改良之研究(1/2) | PI | 國科會 | 2008/08/01-2010/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2008 | 東台精機產學合作計畫-新一世代智慧型主軸開發 | PI | 東台精機股份有限公司 | 2008/06/01-2008/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2007 | 小產學研究計畫-防振器測試技術與設備之研發 | PI | 國科會 | 2007/05/01-2008/06/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2007 | 小產學研究計畫-防振器測試技術與設備之研發 | PI | 杉榮機械有限公司 | 2007/05/01-2008/06/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2007 | 東台產學合作計畫-新一世代智慧型主軸開發 | PI | 東台精機股份有限公司 | 2007/08/01-2007/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2007 | 產學合作：六軸CNC齒輪振動噪音複合檢測機研發(2/2) | Co-PI | 國科會 | 2007/09/01-2008/09/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2007 | 產學合作：六軸CNC齒輪振動噪音複合檢測機研發(2/2) | Co-PI | 光陽工業股份有限公司 | 2007/09/01-2008/09/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2007 | 車輛結構與乘員安全系統暨車輛結構次系統抗撞設計研發技術(第三年度) | Co-PI | 私立大葉大學 | 2007/12/01-2008/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2007 | 次世代光碟機關鍵技術研究-子計畫二：次世代光碟機氣流振噪抑制技術之研發(3/3) | PI | 國科會 | 2007/08/01-2008/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2006 | 車身結構輕量化技術開發及安全性驗證-總計畫(3/3) | PI | 國科會 | 2006/08/01-2007/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2006 | 車身結構輕量化技術開發及安全性驗證-子計畫一：汽車結構輕量化設計技術之研發(3/3) | PI | 國科會 | 2006/08/01-2007/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2006 | 車輛結構與乘員安全系統暨車輛結構次系統抗撞設計研發技術(第二年度) | Co-PI | 私立大葉大學 | 2006/12/01-2007/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2006 | 織物變形之信號處理與分析研究開發 | PI | 財團法人紡織產業綜合研究所 | 2006/04/01-2006/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2006 | 次世代光碟機關鍵技術研究-子計畫二：次世代光碟機氣流振噪抑制技術之研發(2/3) | PI | 國科會 | 2006/08/01-2007/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2006 | 產學合作：六軸CNC齒輪振動噪音複合檢測機研發(1/2) | Co-PI | 國科會 | 2006/09/01-2007/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2006 | 產學合作：六軸CNC齒輪振動噪音複合檢測機研發(1/2) | Co-PI | 光陽工業股份有限公司 | 2006/09/01-2007/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2005 | 次世代光碟機關鍵技術研究-子計畫二：次世代光碟機氣流振噪抑制技術之研發(1/3) | PI | 國科會 | 2005/08/01-2006/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2005 | 汽車引擎腳結構最佳化設計技術 | PI | 華擎機械股份有限公司 | 2005/07/01-2006/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2005 | 建立螺旋式壓縮機振動力學模型 | PI | 復盛股份有限公司 | 2005/05/01-2007/04/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2005 | 武器結構智慧型輕量化與最佳化分析技術 | PI | 國科會 | 2005/01/01-2005/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2005 | 車身結構輕量化技術開發及安全性驗證-總計畫(2/3) | PI | 國科會 | 2005/08/01-2006/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2005 | 我國現行汽車設備改裝或變更法規研擬研究 | 交通部公路局 | 2005/01/01-2005/07/31 | |
| Cheng, Chihchun | Department of Mechanical Engineering | 2005 | 車身結構輕量化技術開發及安全性驗證-子計畫一：汽車結構輕量化設計技術之研發(2/3) | PI | 國科會 | 2005/08/01-2006/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2005 | 車輛結構與乘員安全系統暨車輛結構次系統抗撞設計研發技術(第一年度) | Co-PI | 私立大葉大學 | 2005/12/01-2006/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2004 | 先進光碟機主軸系統關鍵技術研究(3/3)-子計畫五：高速光碟機振動及噪音抑制之研究 | PI | 國科會 | 2004/08/01-2005/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2004 | 聲場音源轉換模擬技術 | PI | 國科會 | 2004/07/01-2005/02/28 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2004 | 車身結構輕量化技術開發及安全性驗證-總計畫(1/3) | PI | 國科會 | 2004/08/01-2005/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2004 | 車身結構輕量化技術開發及安全性驗證-子計畫一：汽車結構輕量化設計技術之研發(1/3) | PI | 國科會 | 2004/08/01-2005/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2004 | SR螺旋壓縮機應力分析、熱傳分析、振動模態分析 | PI | 復盛股份有限公司 | 2004/07/01-2004/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2004 | 智慧型輕量化分析技術研究 | PI | 財團法人精密機械研發中心 | 2004/04/01-2005/03/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2003 | 主軸頭座智慧型輕量化分析技術 | PI | 財團法人精密機械研發中心 | 2003/03/22-2003/11/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2003 | 結構輕量化技術分析 | PI | 東台精機股份有限公司 | 2003/04/01-2005/01/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2003 | PC-Based 聲納與動平衡儀器設計與製作 | PI | 國科會 | 2003/07/01-2004/02/29 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2003 | 先進光碟機主軸系統關鍵技術研究(2/3)-子計畫五：高速光碟機振動及噪音抑制之研究 | PI | 國科會 | 2003/08/01-2004/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2002 | 「(方方土)霖冷凍機械股份有限公司路科分公司」投資審查案(91-C049) | Co-PI | 台南科學工業園區開發籌備處 | 2002/12/20-2002/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2002 | 專利侵害鑑定-漢唐集成公司生產之「防震斜撐片」是否侵害「高架地板之輔助支撐結構」(91-C052) | PI | 漢唐集成股份有限公司 | 2002/12/15-2002/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2002 | 專利侵害鑑定--浪板製造機之結構 | Co-PI | 台灣屏東地方法院 | 2002/04/30-2002/07/29 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2002 | 低振動曲軸分析研究 | Co-PI | 華擎機械股份有限公司 | 2002/09/01-2003/08/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2002 | 汽車關門音音品技術之建立 | PI | 財團法人車輛研究測試中心 | 2002/01/01-2002/12/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2002 | 請求鑑定主宇公司生產之起子把手產品,式樣是否近似於義成公司起子把手產品?(91-C004) | PI | 主宇塑膠股份有限公司 | 2002/02/01-2002/03/01 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2002 | 先進光碟機主軸系統關鍵技術研究(1/3)-子計畫五:高速光碟機振動及噪音抑制之研究 | PI | 國科會 | 2002/08/01-2003/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 電子多孔性散熱器熱傳現象及噪音特性之研究(3/3) | Co-PI | 國科會 | 2001/08/01-2002/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 產學合作：CNC 工具機高速高精度進給技術之研發(2/2) | Co-PI | 國科會 | 2001/02/01-2002/01/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 產學合作：CNC 工具機高速高精度進給技術之研發(2/2) | Co-PI | 台灣麗偉電腦機械公司 | 2001/02/01-2002/01/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 新式樣專利69399「吧咍椅椅座」專利侵害鑑定 | PI | 盟統五金工業股份有限公司 | 2001/02/05-2001/03/04 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 新型專利75566號/傅永枝「焚化爐 | PI | 傅永枝 | 2001/07/03-2001/09/03 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 方礎之Infiniter Laser Genius 6150是否(1)落入052728號及追加一之發明專利範圍(2)是否依照131689號新型專利之技術所獨立製造 | PI | 台灣士林地方法院檢察署 | 2001/10/25-2001/12/25 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 方礎之Infiniter Laser Genius 6150是否(1)落入052728號及追加一之發明專利範圍(2)是否依照131689號新型專利之技術所獨立製造 | PI | 台資光電股公司 | 2001/10/25-2001/12/25 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 方礎之Infiniter Laser Genius 6150是否(1)落入052728號及追加一之發明專利範圍(2)是否依照131689號新型專利之技術所獨立製造 | PI | 方礎光電科技股公司 | 2001/10/25-2001/12/25 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 鑑定被告製造販賣之鑽孔機產品中之結構特徵是否與原告創作之新型126779號「高速自動淺孔機之結構特徵」相同 | PI | 台灣台中地方法院民事庭 | 2001/10/25-2001/12/25 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2001 | 新型151861號(公告第367938號)專利/日本FANUC公司之射出成型機 | Co-PI | 財團法人工業技術研究院 | 2001/11/11-2002/12/01 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2000 | 電子多孔性院熱汽熱傳現象及噪音特性之研究(2/3) | Co-PI | 國科會 | 2000/08/01-2001/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2000 | 等間距支撐樑在移動負荷下其震動噪音波數分析(2/2) | PI | 國科會 | 2000/08/01-2001/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2000 | 新型第053309號「交具筒組」專利侵害鑑定 | PI | 板橋地院 | 2000/03/06-2000/05/08 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2000 | 發明專利第64782號「鎖心」鑑定 | PI | 東炬公司 | 2000/05/01-2000/05/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 2000 | 花盆侵權鑑定 | PI | 彰化地方檢察署 | 2000/08/18-2000/09/20 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1999 | 電子多孔性散熱器傳熱傳現象及噪音特性之研究(1/3) | Co-PI | 國科會 | 1999/08/01-2000/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1999 | 等間距支撐樑在移動負荷下其振動噪聲波數分析(1/2) | PI | 國科會 | 1999/08/01-2000/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1999 | 產學合作：CNC 工具機高速高精度進給技術之研發(1/3) | Co-PI | 台灣麗偉電腦機械公司 | 1999/02/01-2001/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1999 | 產學合作：CNC 工具機高速高精度進給技術之研發(1/3) | Co-PI | 國科會 | 1999/02/01-2001/07/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1999 | 「無刷直流馬達」專利侵害鑑定 | PI | 財團法人工業技術研究院機械所 | 1999/08/18-1999/08/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1999 | 第102651號「自行車輔助踏桿(一孔及三孔)」專利侵害鑑定 | PI | 維豪車料股份有限公司 | 1999/09/02-1999/10/01 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1999 | 螺旋式真空邦浦新型轉子線形修整及加工性研究 | Co-PI | 財團法人工業技術研究院機械所 | 1999/08/01-2000/10/31 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1999 | 「活動式舞台車舞台結構現場鑑定 | PI | 長億舞台照明有限公司 | 1999/10/26-1999/12/25 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1998 | 螺旋式真空邦浦線形設計與加工性研究 | Co-PI | 財團法人工業技術研究院機械所 | 1998/07/01-1999/06/30 |
| Cheng, Chihchun | Department of Mechanical Engineering | 1998 | 結構阻抗分析法於主動吸音結構上之應用 | PI | 國科會 | 1998/08/01-1999/07/31 |
Patents
Print-friendly| Patents | Apply Date | Apply Number | Patent Number | Patent Country | Inventor |
|---|---|---|---|---|---|
| 工具機智慧化暖機方法 | 2023/06/14 | 112122129 | 發明第I855732號 | R.O.C | Cheng, Chih-Chun |
| 防振腳座健康狀態監測裝置及其方法 | 2017/11/30 | 106141933 | I665436 | R.O.C | Cheng, Chih-Chun |
| 防振腳座健康狀態監測裝置及其方法 | 2018/01/24 | 15/878,456 | US 10,732,152 B2 | U.S.A. | Cheng, Chih-Chun |
| 工具機健康狀態監測方法 | 2019/10/24 | 108138447 | 發明第I732324號 | R.O.C | Cheng, Chih-Chun |
| 工具機健康狀態監測方法 | 2020/03/05 | 16/810,251 | US11,119,001B2 | U.S.A. | Cheng, Chih-Chun |
| 感測器安裝最佳化裝置及其方法 | 2020/05/26 | 109117546 | 發明第I742693號 | R.O.C | Cheng, Chih-Chun |
| 感測器安裝位置篩選方法 | 2020/10/23 | 17/078,125 | US11,761,829 B2 | U.S.A. | Cheng, Chih-Chun |
| 光碟機旋轉碟片減振與降低噪音裝置 | 2003/10/08 | 92128009 | I229853 | R.O.C | Cheng, Chih-Chun |
| 滾珠螺桿預壓力偵測的方法 | 2012/10/19 | 101138824 | I482919 | R.O.C | Cheng, Chih-Chun |
| 切削加工參數估測裝置及其方法 | 2014/06/06 | 103119717 | I542439 | R.O.C | Cheng, Chih-Chun |
| 振動抑制裝置 | 2014/10/21 | 103136329 | I537494 | R.O.C | Cheng, Chih-Chun |
| 切削加工轉速調整裝置及其方法 | 2016/11/10 | 105136700 | I626111 | R.O.C | Cheng, Chih-Chun |
| 切削加工轉速調整裝置及其方法 | 2017/05/22 | 15/600,865 | US 10,220,480 B2 | U.S.A. | Cheng, Chih-Chun |
Source：Chung Cheng Academic Achievements Information System