Scopus
Article
1
Algebraic Modeling of Cylindrical Interference-Free Power-Skiving Tool for Involute Internal Gear Cutting With Tilt Angle
Tsai C.Y.
Journal of Manufacturing Science and Engineering
2023, 145 (9)
Article
2
Trajectory Planning of Semi-Trailer Truck Vehicle Based on Algebraic General Trajectory Formula
Tsai C.Y.
IEEE Transactions on Intelligent Transportation Systems
2023, 24 (2) , 1495-1501
Article
3
Integrated mathematical approach for design and manufacturing of power-skiving tool for interference-free involute internal gear cutting
Tsai C.Y.
Mechanism and Machine Theory
2023, 180
Article
4
Simple mathematical approach for analyzing gear tooth profile errors of different gears cut using same power-skiving tool
Tsai C.Y.
Mechanism and Machine Theory
2022, 177
Article
5
Design of free-form trough reflector for solar thermal concentrator system based on quadratic Bézier curves
Tsai C.Y.
Optics Communications
2022, 511
Article
6
Error-free measurement method for 6-DOF systems via matrix decomposition approach
Tsai C.Y.
Applied Mathematical Modelling
2022, 104 , 188-204
Article
7
Power-skiving tool design method for interference-free involute internal gear cutting
Tsai C.Y.
Mechanism and Machine Theory
2021, 164
Article
8
Algebraic General Trajectory Formula for Semitrailer Truck Vehicles
Tsai C.Y., Sung C.K.
IEEE Transactions on Automation Science and Engineering
2021, 18 (4) , 2156-2165
Article
9
Calibration Procedure of Camera with Multifocus Zoom Lens for Three-Dimensional Scanning System
Huang J.C., Liu C.S., Tsai C.Y.
IEEE Access
2021, 9 , 106387-106398
Article
10
Gear module adjustment method for shrinkage compensation of injection molded plastic gears using single dedicated hob
Tsai C.Y.
Mechanism and Machine Theory
2019, 140 , 233-244
學術著作
1
Algebraic modeling of cylindrical interference-free power-skiving tool for involute internal gear cutting with tilt angle
Chung-Yu Tsai
Journal of Manufacturing Science and Engineering-Transactions of the ASME
2023 年
9 月
Journal of Manufacturing Science and Engineering-Transactions of the ASME,Vol.145, No.9,pp.091002-
期刊論文
2
Integrated mathematical approach for design and manufacturing of power-skiving tool for interference-free involute internal gear cutting
Chung-Yu Tsai
Mechanism and Machine Theory
2023 年
2 月
Mechanism and Machine Theory,Vol.180, No.,pp.105172-
期刊論文
3
Trajectory planning of semi-trailer truck vehicle based on algebraic general trajectory formula
Chung-Yu Tsai
IEEE Transactions on Intelligent Transportation Systems
2023 年
2 月
IEEE Transactions on Intelligent Transportation Systems,Vol.24, No.2,pp.1495-1501
期刊論文
4
Simple mathematical approach for analyzing gear tooth profile errors of different gears cut using same power-skiving tool
Chung-Yu Tsai
Mechanism and Machine Theory
2022 年
11 月
Mechanism and Machine Theory,Vol.177, No.,pp.105042-
期刊論文
5
Refractive collimation beam shaper design and sensitivity analysis using free-form profile construction method
Chung-Yu Tsai
Journal Of The Optical Society Of America A-Optics Image Science And Vision
2017 年
7 月
Journal Of The Optical Society Of America A-Optics Image Science And Vision,Vol.34, No.7,pp.1236-1245
期刊論文
6
Free-form surface design method for collimator TIR lens
Chung-Yu Tsai
Journal Of The Optical Society Of America A-Optics Image Science And Vision
2016 年
4 月
Journal Of The Optical Society Of America A-Optics Image Science And Vision,Vol.33, No.4,pp.785-792
期刊論文
7
Free-form surface design method for non-axial symmetrical reflectors producing arbitrary image patterns
Chung-Yu Tsai
Optical Engineering
2016 年
7 月
Optical Engineering,Vol.55, No.7,pp.075104-1-075104-8
期刊論文
8
Determination of first-order derivatives of skew-ray at aspherical surface
Psang Dain Lin、Chung-Yu Tsai
Journal Of The Optical Society Of America A-Optics Image Science And Vision
2012 年
6 月
Journal Of The Optical Society Of America A-Optics Image Science And Vision,Vol.29, No.6,pp.1141-1153
期刊論文
9
A general calculation and sensitivity analysis of reflector scanning systems using skew ray tracing
Chung-Yu Tsai
Applied Physics B-Lasers and Optics
2010 年
2 月
Applied Physics B-Lasers and Optics,Vol.98, No.2,pp.481-487
期刊論文
10
Prism design for image orientation changes by screw triangle method
Chung-Yu Tsai、Psang Dain Lin、Yu-Lung Lo
Optics Letters
2008 年
5 月
Optics Letters,Vol.33, No.10,pp.1081-1083
期刊論文